Passat Sedan V6-3.6L (BLV) (2008)
Brake Booster Vacuum Sensor: Service and Repair
Brake Booster Vacuum Sensor
Brake Booster Vacuum Sensor
Removing
On vehicles with 6-cyl. gasoline engine, the battery is in luggage compartment, accordingly only air filter housing must be removed.
-
Remove the battery carrier.
-
Disconnect harness connector - 1 - from brake booster vacuum sensor (G483) - 2 -.
-
Insert a screwdriver between stop and one end of securing ring into groove of sealing ring.
-
Press the circlip - 1 - just far enough out of the groove so that the brake booster vacuum sensor (G483) - 2 - can be pulled out of the brake booster.
Installing
-
Installation is in reverse order of removal.