Passat Sedan V6-3.6L (BLV) (2008)
High Pressure Sensor / Switch: Service and Repair
High Pressure Sensor
Removing
‹› For the purpose of a better illustration, the right headlamp is removed.
-
Disconnect harness connector from high pressure sensor - 1 -.
-
Remove the high pressure sensor - 2 - from the refrigerant line connection.
‹› Replace the o-ring
‹› High Pressure Sensor (G65) - 2 - may also be installed on a different side in the vicinity of the condenser, depending on the engine version.