Passat Sedan V6-3.6L (BLV) (2008)
-
Disconnect the connector - 2 - from the Driver Front Airbag Crash Sensor (G283) - 3 -.
-
Remove bolts - 1 - (4.5 Nm).
Installation
-
To install, perform the steps used for removal in reverse order.
-
Switch on ignition.
CAUTION!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery.
Front Passenger Front Airbag Crash Sensor
Crash Sensors
Front Passenger Front Airbag Crash Sensor
‹› The passenger front airbag crash sensor (G284) is located on the right side of the lock carrier.
-
Disconnect vehicle battery.
Removal
CAUTION!
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units.