Passat Sedan V6-3.6L (BLV) (2008)
/Page-331001.png)
Steering Angle Sensor: Procedures
Steering Angle Sensor, Basic Setting
Steering Angle Sensor, Basic Setting
If steering wheel is offset, Basic Setting of steering angle sensor (G85) must be checked! Perform basic setting in Guided Fault Finding using
the Vehicle Diagnosis, Testing and Information System (VAS 5051).
To do so, enter Function/Component selection via the Go to button.
Steering Angle Sensor Basic Setting Must Be Checked After the Following Assembly Work
Steering Angle Sensor Basic Setting Must Be Checked After the Following Assembly Work
‹› If the steering angle sensor (G85) was removed or replaced.
‹› After removing or replacing steering column.
‹› After removing or replacing steering gear.
‹› If the steering wheel was offset.
