Passat Sedan V6-3.6L (BLV) (2008)
Acceleration Sensor: Service and Repair
Left and Right Front Body Acceleration Sensor Retainer
Left and Right Front Body Acceleration Sensor Retainer
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Drift (VW 222 A)
‹› Spiral bore dia. 11 mm
Removing
-
Remove the left front body acceleration sensor (G341). Refer to => [ Front Body Acceleration Sensor ] See: Front Body Acceleration Sensor.
-
Remove the right front body acceleration sensor (G342). Refer to => [ Right Front Body Acceleration Sensor ] See: Right Front Body
Acceleration Sensor
-
Remove the retainer bolts and remove the retainer from the shock absorber dome.
Installing
CAUTION!
The body acceleration sensors must not be interchanged.
-
Clean the shock absorber dome.
Front Left Body Acceleration Sensor
-
Attach the front left body acceleration sensor to the retainer.
-
Be sure to pay attention to the installation position of the left front body acceleration sensor retainer.