volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Suspension Mode Switch > < Procedures|Page 1178
Page 1
background image

Suspension Control Pressure Sensor/Switch: Service and Repair

Front Wheel Drive (FWD)

Left Rear Level Control System Sensor, from MY 2008

‹› Left rear level control system sensor (G76) for adaptive chassis DCC, removing and installing, refer to => [ Left Rear Level Control System

Sensor, FWD ] See: Ride Height Sensor/Service and Repair/Left Rear Level Control System Sensor, FWD.

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1331)

Removing

-

Disconnect the connector - 1 -.

-

Remove the bolts - 2 - from the lower transverse link.

-

Remove bolts - arrows - from the subframe.

-

Remove left rear level control system sensor.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

The left rear level control system sensor lever must point toward the outside of the vehicle.

-

After replacing, perform a headlamp basic setting.

Tightening Specifications

Suspension Mode Switch > < Procedures|Page 1178