Passat Sedan V6-3.6L (BLV) (2008)
/Page-361004.png)
-
Shift the transmission to the "P" position using the lever - 3 -. To do so, push the lever - 3 - rearward against the direction of travel until it stops.
-
Shift the transmission to the "N" position using the lever - 3 -. To do so, press the lever - 3 - two latched positions toward the front in the direction
of travel.
-
Install the spring washer - 2 - and nut - 1 - onto the shift rod - 4 -.
-
Tighten the nut - 1 - to 13 Nm.
6 Cylinder Gas Vehicles
-
Install the coolant expansion tank.
-
Connect the battery Ground (GND) cable with the ignition turned off.
Continuation For All Vehicles
-
Check the shift mechanism. Refer to => [ Selector Mechanism, Checking ] See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shifter A/T/Testing and Inspection/Component Tests and General Diagnostics.
