Volkswagen Workshop Service and Repair Manuals

Transmission Speed Sensor: Service and Repair
Transmission Input Speed Sensor

Transmission Input Speed Sensor

Removing

-

Remove the valve body. Refer to => [ Valve Body ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.

-

Remove the bolt - 1 - for the transmission input speed (RPM) sensor (G182).

-

Remove the sensor from transmission.

Installing

Installation is performed in the reverse order of removal. Pay attention to the following:

-

Press the sensor into the transmission until seated.

-

Install the bolt - 1 - for the transmission input speed (RPM) sensor. Tightening specification, refer to => [ Fastener Tightening Specifications ] 
See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/Valve Body, A/T/Fastener Tightening Specifications - Gears,
Hydraulic Controls.

-

Install the valve body. Refer to => [ Valve Body ] See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Valve Body.