Passat Sedan V6-3.6L (BLV) (2008)
-
Disconnect electrical harness connector - 1 - at suppressor - 4 -.
-
Remove screw - 3 - and remove positive terminal trip - 2 - with suppression filter from bracket.
Installing:
Install in reverse order.
-
Tighten all threaded connections to specified torque shown in => [ Fastener Tighten Specifications, External Starting Point ] See: Specifications.
-
Reconnect battery, refer to => [ Battery In Luggage Compartment, Disconnecting and Connecting ] See: Service and Repair/Removal and
Replacement/Battery In Luggage Compartment, Disconnecting and Connecting.