Passat Sedan V6-3.6L (BLV) (2008)
Remote Battery Jumper Terminal: Service and Repair
Jump Start Point With Suppressor
Jump Start Point with Suppressor
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Disconnect battery, refer to => [ Battery In Luggage Compartment, Disconnecting and Connecting ] See: Service and Repair/Removal and
Replacement/Battery In Luggage Compartment, Disconnecting and Connecting.
‹› Air filter housing is removed for reasons of clarity. It is not required when doing repairs.
-
Disengage retaining clip - arrow A - and open cover - 1 - over positive pole pick-up.
-
Disengage cover - 2 - over electrical wires in - direction of arrow B -.
-
Remove the nuts - 5 - and - 6 - on positive wires.