Passat Sedan V6-3.6L (BLV) (2008)
-
Disengage socket -1 - and pull it off handle part - 2 -.
-
Turn around handle part - 2 - of torque wrench 180 degrees and insert socket again.
-
Set turning direction of torque wrench to left at socket.
-
Insert TORX screwdriver insert V.A.G 1603/1 into generator shaft.
-
Counter hold multi-point adapter VAS 3400 using 17 mm open end wrench.
-
Tighten ribbed belt pulley with freewheel by turning generator drive shaft toward left using torque wrench V.A.G 1332.
-
Tighten all threaded connections using the specified torques.