Passat Sedan V6-3.6L (BLV) (2008)
-
Remove E-box bracket - 2 - from vehicle.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten the screws and nuts to the tightening specifications. Refer to => [ Fastener Tightening Specifications, E-box, In Engine Compartment, Left
Side ] See: Electrical Accessory Panel/Specifications/Fastener Tightening Specifications, E-box, In Engine Compartment, Left Side.
-
Place cover - 2 - onto E-box and slide securing bracket - 1 - in - direction of arrow - until cover - 2 - is engaged.
‹› Then check whether cover - 2 - of E-box is correctly engaged.