Passat Sedan V6-3.6L (BLV) (2008)
The (VAS 1978/3) is a component of the wiring harness repair kit (VAS 1978 B) and from the previous versions.
Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.
Stripping:
-
Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.
-
Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.
-
Open pliers again and remove the stripped wire end.
-
If necessary, cut wires using side-cutter function on the top of the wire stripper.