Passat Sedan V6-3.6L (BLV) (2008)
1) If steering wheel is crooked at end of alignment procedure, it must be straightened. Then perform basic setting for steering angle sensor (G85) using
Vehicle Diagnosis, Testing and Information System (VAS 5051).
Front Axle Camber, Correcting
Front Axle Camber, Correcting
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
‹› Camber correction is required only after repair work on chassis. Camber is not adjustable but can be rearranged by moving brackets and/or