Passat Sedan V6-3.6L (BLV) (2008)
-
Remove tie rod - 1 -.
Installing
CAUTION!
Pay attention to the different trailing arm versions when replacing the tie rod. Refer to => [ Trailing Arm Characteristics ] See: Trailing
Arm/Application and ID.
Note the allocation of the tie rods for the trailing arms. Refer to => [ Note the allocation of the
tie rods for the trailing arms ] See: Trailing Arm/Application and ID.
-
Insert tie rod into vehicle and tighten the bolts by hand.
The bolted connections of the tie rod must only be fastened when the dimension - a - is achieved! Refer to => [ Measure Dimension ] See:
Service and Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive (FWD).
-
Fasten the tie rod - 1 - to the subframe and tighten the new nut - arrow -.
-
Tighten bolts - arrows - for stabilizer clamp.