Passat Sedan V6-3.6L (BLV) (2008)
Rear Knuckle: Service and Repair
Removal and Installation
Wheel Bearing Housing
Front Wheel Drive (FWD)
Wheel Bearing Housing
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
Removing
-
Remove wheel.
-
Remove coil spring. Refer to => [ Coil Spring ]. See: Service and Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive
(FWD)/Removal and Installation/Coil Spring
-
Remove wheel bearing/wheel hub unit. Refer to => [ Wheel Bearing and Wheel Hub ]. See: Service and Repair/Removal and Replacement/Rear
Suspension/Front Wheel Drive (FWD)/Removal and Installation/Wheel Bearing and Wheel Hub
-
Remove cover plate.
-
Remove ABS wheel speed sensor from wheel bearing housing.
-
Remove bolt - arrow -.
-
Remove bolt for tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 - from wheel bearing housing - 4 -.