Passat Sedan V6-3.6L (BLV) (2008)
‹› Bolting at wheel bearing housing may occur only when dimension - a - has been obtained! Refer to => [ Measure Dimension ] See: Service and
Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive (FWD).
-
Install coil spring. Refer to => [ Coil Spring ]. See: Service and Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive
(FWD)/Removal and Installation/Coil Spring
-
Tighten bolt for tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 -.
-
Tighten nut for coupling rod - arrow -.
-
Tighten bolts - arrows -.