Passat Sedan V6-3.6L (BLV) (2008)
Rear Knuckle Alignment Link: Service and Repair
Front Wheel Drive (FWD)
Transverse Links and Tie Rods Assembly Overview
1
Eccentric Bolt
‹› For camber setting.
‹› After loosening, perform vehicle alignment. Refer to => [ Wheel Alignment Overview ] See: Alignment/Service and Repair/Wheel Alignment
Overview.
2
Nut
‹› M12 x 1.5
‹› 95 Nm
‹› Self-locking.
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Service and
Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive (FWD)/Overview/Rear Axle In Curb Weight Position
3
Eccentric Washer
‹› Inner bore with tab.