Passat Sedan V6-3.6L (BLV) (2008)
19
Lower Bonded Rubber Bushing for Pendulum Support
‹› Ejecting and pressing in, refer to => [ Subframe Bonded Rubber Bushings ] See: Subframe/Front Subframe Mount/Service and Repair.
20
Pendulum Support
‹› Bolt first to transmission, then to subframe.
‹› Various versions
21
Bolt
‹› Always pay attention the bolt size and strength class. There are different tightening specifications.
‹› M10 x 75 strength class 8.8: 40 Nm + 90° turn
‹› M10 x 75 strength class 10.9: 50 Nm + 90° turn
CAUTION!
From MY 2008, Heli-Coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions. Differences
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmissions, there is not Heli-Coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› M12 x 1.5 x 85: 60 Nm + 90° turn
‹› Always replace after removal
22
Bolt
‹› Pay attention to the bolt strength class. There are different tightening specifications.
‹› M10 x 35 strength class 8.8: 40 Nm + 90° turn
‹› M10 x 35 strength class 10.9: 50 Nm + 90° turn
CAUTION!
From MY 2008, Heli-Coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions. Differences
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmissions, there is not Heli-Coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› Always replace after removal
23
Shield
24
Bolt
‹› 6 Nm
25
Bolt
‹› M12 x 1.5 x 90
‹› 70 Nm + 180° turn
‹› Always replace after removal.
26
Subframe