Passat Sedan V6-3.6L (BLV) (2008)
‹› Always replace after removal.
5
Wheel Bearing Housing
6
Nut
‹› 45 Nm
‹› Self-locking
‹› Always replace after removal.
‹› Counterhold at socket head of bolt when tightening => [ (Item 7) Bolt ].
7
Bolt
8
Coupling Rod
‹› Connects stabilizer to trailing link/wheel bearing housing.
9
Subframe
Removal and Installation
Front Wheel Drive (FWD)
Stabilizer Bar
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
Removing
‹› The following work steps are described for the left side of the vehicle. These work steps also apply simultaneously for right side of vehicle.
-
Remove the nut - 1 - and pull coupling rod - 2 - out of stabilizer.
‹› Do not loosen bolt - arrow - for tie rod - 3 -.
-
Remove bolts - arrows - for stabilizer clamp.