Passat Sedan V6-3.6L (BLV) (2008)
Service and Repair/Removal and Replacement/Rear Suspension/Converting to Heavy Duty Suspension, FWD.
4
Upper Spring Support
5
Bolt
‹› M14 x 1.5 x 85
‹› 180 Nm
‹› Always replace after removal.
6
Bolt
‹› M10 x 35
‹› 50 Nm + 45° turn
‹› Always replace after removal.
7
Shock Absorbers
‹› Removing and installing, refer to => [ Shock Absorber ] See: Service and Repair/Removal and Replacement/Rear Suspension/Front Wheel
Drive (FWD).
‹› Note different suspension versions. Refer to => [ Vehicle Data Label ] See: Application and ID.
‹› Always following instructions for converting to Nivomat. Refer to => [ Converting to Nivomat, FWD ] See: Service and Repair/Removal and
Replacement/Rear Suspension/Converting to Nivomat, FWD.
‹› Always following instructions for converting to heavy duty suspension. Refer to => [ Converting to Heavy Duty Suspension, FWD ] See:
Service and Repair/Removal and Replacement/Rear Suspension/Converting to Heavy Duty Suspension, FWD.
8
Washer
9
Lower Transverse Link
‹› Removing and installing, refer to => [ Lower Transverse Link ] See: Service and Repair/Removal and Replacement/Rear Suspension/Front
Wheel Drive (FWD).
10
Wheel Bearing Housing
‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Service and Repair/Removal and Replacement/Rear Suspension/Front
Wheel Drive (FWD).