Passat Sedan V6-3.6L (BLV) (2008)
Position bonded rubber bushing on longitudinal control arm so that marked line is between protrusions - 1 -.
‹› Always make sure that bonded rubber bushings are in correct installation position to bushing of trailing link.
-
Install tools as shown in the illustration.
1. Tube (T10230/5)
2. Thrust plate (T10230/12), chamfer must point to bonded rubber bushing
3. Bonded rubber bearing
4. Installation device (3372)
5. Thrust plate (VW 402)
-
Press in bonded rubber bushing flush.
-
Install mounting bracket on trailing link.