Passat Sedan V6-3.6L (BLV) (2008)
Fluid Filter - A/T: Service and Repair
Oil Filter
Removing
-
Remove the oil pan. Refer to => [ Oil Pan ] See: Fluid Pan/Service and Repair.
-
Remove the oil filter bolts - arrows -.
-
Remove the oil filter - A - from the valve body.
Installing
-
Lightly lubricate the seals on the oil filter suction collar with Automatic Transmission Fluid (ATF).
-
If the seals are loose or damaged, the oil filter must be replaced.
-
Install the oil filter - A - to the valve body and tighten the bolts - arrows -. Refer to => [ Fastener Tightening Specifications ] See: Valve
Body/Specifications/Fastener Tightening Specifications - Gears, Hydraulic Controls.