Passat Sedan V6-3.6L (BLV) (2008)
Shifter A/T: Removal and Replacement
Selector Mechanism Overview
Selector Mechanism Overview
CAUTION!
Shift the selector lever into the "P" position and engage the parking brake before working with the engine running.
1
Shift Handle with Cover
‹› Handle, removing and installing. Refer to => [ Selector Handle with Cover ] See: Selector Handle With Cover.
‹› Manual release, refer to => [ Selector Lever Manual Release ] See: Procedures/09M,09MA Transmission.
‹› Before removing, pull the button out beyond its pressure point and secure it with tape. This prevents the button from being pushed into the
handle accidentally.
‹› If the button is pushed in when the handle is removed:
-
Just before installing, pull out the button beyond the pressure point (sense this by touch).
2
Selector Mechanism with Lever
‹› Passat and CC, removing and installing, refer to => [ Selector Mechanism with Lever ] See: Service and Repair/Removal and
Replacement/09M,09MA Transmission/Passat and CC Specific Components.
3
Bolt with Spring