volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3941 > < Shift Solenoid, A/T|Locations|Page 3936
Page 1
background image

Shifter A/T: Component Tests and General Diagnostics

Selector Mechanism, Checking

The starter must not be able to be operated in selector lever positions "R", "D" and "S".

For speeds exceeding 5 km/h and shifting into selector lever position "N", the shift lock solenoid must not engage to lock the selector lever. Selector
lever can be shifted into driving gear.

For speeds below 5 km/h (almost a stand still) and shifting into selector lever position "N", the shift lock solenoid must only engage after
approximately 1 second. Selector lever can only be shifted out of the "N" position with the brake pedal pressed.

Selector Lever in "P" Position and Ignition Turned On:

‹› Brake pedal is not pressed:

Selector lever is locked and cannot be moved out of the "P" position with the button pressed. Selector lever is blocked by the selector lever lock
solenoid.

‹› Brake pedal is pressed:

Selector lever lock solenoid releases the selector lever. Selecting a driving mode is possible. Shift the selector lever slowly through from "P" to "S";
while doing this, check whether the display for the selector lever position in the instrument panel insert matches the actual selector lever position.

Selector Lever in "N" Position and Ignition Turned On:

‹› Brake pedal is not pressed:

Selector lever is locked and cannot be shifted out of the " N" position with the button pressed. Selector lever is blocked by the selector lever lock
solenoid.

‹› Brake pedal is pressed:

Selector lever lock solenoid releases the selector lever. Selecting a driving mode is possible.

Selector Level in "Tiptronic" Position

‹› Move the selector lever into the Tiptronic gate:

Brightening of the "D" symbol must go out in the selector mechanism cover and the "+" and "-" symbols must light up.

The selector lever display in the instrument panel insert must change from "P R N D S" to "6 5 4 3 2 1" when the selector lever is shifted to the
Tiptronic gate.

Ignition and Lights Turned On

The appropriate symbol is being lit up in the selector mechanism cover.

Selector Lever Position Display

Simultaneous lighting of all segments of the transmission range selector lever display indicates the transmission is in the emergency running mode.

Component Tests and General Diagnostics|Page 3941 > < Shift Solenoid, A/T|Locations|Page 3936