Passat Sedan V6-3.6L (BLV) (2008)
‹› Tighten the oil pan bolts in several stages in a diagonal sequence.
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
6
Gasket
‹› With spacers (quantity: 8).
‹› Check before installing
‹› Replace brittle, cracked or deformed gaskets.
7
Magnet
‹› Quantity: 2, in the oil pan depressions.
‹› Clean before installing the oil pan.
8
Bolt
‹› For mounting the valve body to the transmission.
‹› Quantity: 12, various lengths, refer to => [ Valve Body Bolt Lengths
and Locations ] See: Valve Body.
‹› Always replace the bolts.
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
9
Bolt
‹› Quantity: 3
‹› For securing the oil filter to the valve body.
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
10
Oil Filter
‹› Removing and installing, refer to => [ Oil Filter ] See: Fluid Filter - A/T/Service and Repair.
11
Valve Body
‹› Removing and installing, refer to => [ Valve Body ] See: Valve Body.
12
Bolt
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
13
Bolt
‹› Tightening specification, refer to => [ Fastener Tightening Specifications ] See: Specifications/Fastener Tightening Specifications - Gears,
Hydraulic Controls.
14
Transmission Input Speed (RPM) Sensor (G182)
‹› Removing and installing, refer to => [ Transmission Input Speed Sensor ] See: Sensors and Switches - A/T/Transmission Speed Sensor/Service
and Repair/Transmission Input Speed Sensor.
15
Bolt