Passat Sedan V6-3.6L (BLV) (2008)
-
Carefully hold the shift lever - 1 - in place using pliers - 2 - so that the torque is not transferred to the Multifunction transmission range switch.
-
Install the oil filter. Refer to => [ Oil Filter ] See: Fluid Filter - A/T/Service and Repair.
-
Add the ATF, check the ATF level and top off if necessary. Refer to => [ Automatic Transmission Fluid Level, Checking and Filling ] See: Fluid -
A/T/Service and Repair/Automatic Transmission Fluid Level, Checking and Filling.
-
Connect the (VAS 5051) and advance the program until "Function/component selection" is displayed.
-
Then press "Powertrain (Repair Group 01; 10 to 26; 28 to 39)".
-
After that "6 Spd. Automatic Transmission 09G".
-
Press "01 - On Board Diagnostic".
-
Press "Functions".
-
Press "Basic Setting".