Passat Sedan V6-3.6L (BLV) (2008)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft Assembly Overview From 07.07
Driveshaft Assembly Overview
‹› Beginning 07.07 a one piece driveshaft, which can no longer be separated in the center, is being installed.
‹› Do not perform any service work on the driveshaft.
1
Transmission with bevel box
2
12 point bolt
‹› For the front flexible disc to the driveshaft.
‹› M10 x 30
‹› 50 Nm and 90° additional turn.
‹› Always replace
3
Front flexible disc
‹› Installation position: Open side of heat shield faces toward transmission.
4
12 point bolt
‹› For the flexible disc to the bevel box.