Passat Sedan V6-3.6L (BLV) (2008)
So that noises due to imbalance do not occur later:
-
If there are no markings - arrows - present, then mark the position of the driveshaft to the flange on the final drive.
-
Also mark the position of the driveshaft flexible disc to the bevel box output flange.
-
Remove the driveshaft bolts from the rear final drive and lower it onto the engine and transmission holder (V.A.G 1383 A).
-
When removing and installing the driveshaft, be careful not to damage the bushing - arrow -.