Passat Sedan V6-3.6L (BLV) (2008)
/Page-1170002.png)
-
Remove rear driveshaft flexible disc bolts - arrows - from the rear final drive.
-
Remove the driveshaft intermediate bearing bolts - arrows - from the vehicle.
-
Remove the rear driveshaft from the rear final drive flange.
‹› If the rear driveshaft tube cannot be removed from the centering pins, remove the pendulum support from the transmission. To do this, remove
bolts - 2 - and - 3 - and press the engine transmission assembly forward slightly toward the front end.
