Passat Sedan V6-3.6L (BLV) (2008)
Flex Plate: Service and Repair
Drive Plate
Drive Plate
Special tools, testers and auxiliary items required
‹› Counter-Holder Tool (T10069)
‹› Torque Wrench (40-200 Nm) (V.A.G 1332)
Removing
-
Secure the vibration damper using (T10069).
-
Loosen the drive plate bolts diagonally and remove them.
-
Remove the drive plate.
Installing
-
Install drive plate onto the crankshaft.
-
Install at least 3 old bolts and tighten them to 30 Nm.
-
Measure dimension - a - via the 3 holes for the torque converter bolts via a straightedge and micrometer and calculate the mean value.
-
Compare the average (measured distance + thickness of the straightedge) with the specified value. Specified value: 15.7 to 17.3 mm