Passat Sedan V6-3.6L (BLV) (2008)
Differential Carrier Support: Service and Repair
Rubber Bonded Bushings
Rubber Bonded Bushings
Special tools, testers and auxiliary items required
‹› Thrust piece 3291/1 from the assembly device (3291)
‹› Spindle from the assembly device (3292)
‹› Thrust pieces 3348 and 3348/1 from the front and rear bearing tool (3348)
‹› Internal puller (Kukko 21/7) - 1 -
‹› Counter support (Kukko 22/2) - 4 -
Example of The Identification on a "02D" Rear Final Drive
‹› The marking - arrow - on the bottom side of the rear final drive identifies which final drive is installed.
Removing
Upper Bushing
CAUTION!
Wear protective gloves.
To position the counter support:
-
Break two pieces out of the bushing collar - arrows -.