Passat Sedan V6-3.6L (BLV) (2008)
Oil Pump: Service and Repair
Haldex Clutch Pump
Special tools, testers and auxiliary items required
‹› Torque wrench, 2 to 10 Nm (V.A.G 1783)
‹› Drip tray for VAS 6100 (VAS 6208)
Removing
-
Switch ignition off.
-
Place reservoir underneath.
-
Remove drain plug - A - and completely drain the high performance Haldex clutch oil.
-
Install drain plug - A - with new seal and tighten to 30 Nm.
-
Lower rear final drive slightly. Bolt - arrow - for the final drive from mounting bracket must be loosened approximately 7 turns to do so.
-
Disconnect the pump connector - arrow - from the control module.