Passat Sedan V6-3.6L (BLV) (2008)
-
Install the oil container - A - on the charging device for Haldex 2 couplings (VAS 6291).
-
Now open valve - arrow - and hold oil container as shown in illustration.
Haldex clutch is now filled.
-
Raise vehicle after a few minutes.
‹› If the bevel box is filled correctly, oil should leak out from the adapter - A -.
‹› If no oil is leaking, lower vehicle and perform filling procedure again.
-
Raise vehicle.
-
If oil is leaking, place an oil container under the Haldex clutch (for example, on a workshop cart).
Overflowing oil now runs back into oil container.
-
If no more oil runs back, remove the charging device for Haldex 2 couplings (VAS 6291).