Passat Sedan V6-3.6L (BLV) (2008)
Install in reverse order of removal, noting the following:
-
Tighten the screws - 1 - to the tightening specification shown in => [ Fastener Tightening Specifications, Headlamp Washer System ] See:
Specifications/Fastener Tightening Specifications, Headlamp Washer System.
-
Bleed headlamp washer system after completing assembly work, refer to => [ Headlamp Washer System, Bleeding ] See: Service and
Repair/Procedures/Headlamp Washer System, Bleeding.