volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 10383 > < Procedures|Page 10381
Page 3
background image

Perform the following procedure:

-

Place the windshield wiper in the service position. To do this, switch the ignition on and off again once with the hood closed. Then press the wiper
lever and the windshield wipers will stay in the service position. 

-

Remove the right windshield wiper from the windshield and fold it upward.

CAUTION!
To avoid damage, only hold the windshield wiper at the wiper joint and do not pull on the wiper blade.

-

Depending on the version, rotate the wiper arm with the lip upward and remove it or loosen the arm at the joint - 3 - by pressing the locking
mechanism - 1 - in the retainer - 2 - and removing the wiper arm.

Procedures|Page 10383 > < Procedures|Page 10381