Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Subframe: Service and Repair
Front
Threads In Longitudinal Member, Servicing
Front/Threads in longitudinal member, servicing
It is possible to service the threads in the nuts welded in the longitudinal member depending on certain conditions.
-
Servicing work may only be carried out once per thread.
-
If servicing is necessary after this, the nuts must be replaced.
-
Observe the operating instructions of the VAS repair kit.
WARNING: When drilling, it is essential that eye protection be worn!
-
Have your work checked by the foreman responsible or person next in charge.
-
Correct any damage to the underbody sealant layer.
-
Only use the VAS repair kit listed in the table for maintenance
VAS thread repair kit
Subframe, Removing and Installing
Subframe, removing and installing
Special tools and equipment required