Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
-
Remove bolts (TORX T15) -arrows A-.
-
Carefully unclip operating rod -1-from lever - arrow B- using a screwdriver.
-
Turn operating rod -1- -arrow C- and remove motor -2-.
-
Disconnect electrical connector.
-
Remove flap motor.
Installing and adjusting
-
Initiate Basic setting, Function 04, with VAG 1551 Scan Tool (ST); Climatronic On Board Diagnostic (OBD).
Central air flap motor -V70-, removing and installing
The temperature flap lever and operating rod are color coded "Blue".
Removing
-
Remove instrument panel
-
Loosen instrument panel cross member.
For the next steps, an assistant must lift and hold the heater/evaporator unit.
- Remove footwell air outlet.