Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
-
Loosen bolt -A- on both sides.
-
Unhook parking brake cables -B- out of retainer -C-.
-
Press locking lugs -A- together and push parking brake cables -2- out from control arm -1-.
Note: Do not pull on parking brake cable otherwise the parking brake adjustment will be changed!
-
Remove securing bolts -arrows- from brake caliper housing while counter-holding on guide pins.
-
Take off brake caliper housing and secure with wire so that the weight of the brake caliper does not stress or damage the brake hose.
-
Unbolt vehicle speed sensor wiring -2-.
1. Securing pin
-
Unclip vehicle speed sensor wiring from axle beam.
3. Securing point to axle beam
-
Disconnect ABS vehicle speed sensor from wheel bearing housing.