Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Shift Interlock Cable: Adjustments
Locking cable, adjusting
-
Loosen bolt -6-.
-
Must be able to move support bracket -3- by hand in direction of arrow -5-.
-
Move steering column down and to rear.
-
Fit setting bar 3352 A -item 4 between locking lever and locking cable eye.
-
To compensate for play, pull support bracket in direction of arrow-5- onto stop and tighten bolt -6- to 10 Nm.
-
Remove setting bar.
-
Check ignition key withdrawal lock after each adjustment of locking cable.
-
Install steering column switch.
-
Install steering wheel with airbag.
-
Installing center console and extension.
-
Install selector lever handle.
-
Connect battery Ground strap.
-
On vehicles with coded radio unit, activate code.
-
Initialize electric windows, adjust clock.