Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Installing
-
Unclip wiring connection connector housing at CD changer.
-
Slide CD changer into glove compartment installation frame and thread wiring connection through opening in glove compartment and upward.
-
Now slide CD changer farther in until it engages audibly.
-
Secure connector - A - at top of glove compartment with a cable tie - arrow -, ensure it does not cause any rattling noises. Cut off extra cable tie
length.
-
Reconnect connectors.
-
Reinstall glove compartment.