Passat Sedan 4Motion V6-3.6L (BLV) (2007)
‹› Removing and Installing, refer to => [ Front Bumper Cover ] See: Front Bumper Cover
2
Center Protective Molding
‹› Left and right
‹› Locked to bumper cover - 1 -.
‹› Protective molding can be carefully released from locking mechanisms using a plastic wedge from outside and removed.
3
Protective Strip
‹› Left and right
4
Bolt
‹› Tightening specification: 2 Nm
5
Cover
‹› Left and right
‹› Remove the bolt - 6 -.
‹› The cover can be carefully released from locking mechanisms using a plastic wedge from outside and removed.
6
Bolt
‹› Tightening specification: 2 Nm
7
Spoiler
‹› Material PC/ABS
‹› Remove only when bumper cover - 1 - has been removed.
8
Decorative Trim Strip
‹› Remove only when center vent grille - 9 - has been removed.
9
Center Vent Grille
‹› Remove only when bumper cover - 1 - has been removed.
10
Bolt
‹› Tightening specification: 2 Nm
11
Guide Piece
‹› Left and right
‹› Remove the bolt - 10 - and remove from bumper cover - 1 -.
Front Bumper Cover Substructure
Front Bumper Cover
Front Bumper Cover Substructure