Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Front Door Hinge: Service and Repair
Door Hinges, Assembly Overview
NOTE:
-
The description applies to the right side. The left side is derived accordingly from this.
-
Bolts for door hinges must always be replaced after loosening.
-
The tightening torque for the bolts from the door hinge to the door - 2,4 and 12 - has changed.
1
-
Door
2
-
Socket head bolt
-
50 Nm
-
Always replace bolts after loosening
3
-
Door hinge
-
Upper portion is attached to lower portion of hinge with screw - 8 -.
-
Hinge is divided
4
-
Socket head bolt
-
50 Nm
-
Always replace bolts after loosening
5
-
Socket head bolt
-
Installed from the vehicle interior
-
Remove lower A-pillar trim
-
20 Nm + 1/4 additional turn (90°)
-
Always replace bolts after loosening
6
-
Door hinge with door arrester
-
Lower portion is attached to upper portion of hinge with screw - 8 -.
-
Hinge is divided
7
-
Socket head bolt