Installing a Steel Subframe for Passat Sedan 4Motion V6-36L (BLV) (2007): Preparation Work, AWD
Rear Subframe: Service and Repair
All Wheel Drive (AWD)
All Wheel Drive (AWD)
Subframe and Final Drive Assembly Overview
The - arrow - points in driving direction.
1
Subframe
‹› Different versions: Aluminum and steel.
‹› Only steel subframes are available as a replacement part.
‹› When replacing an aluminum subframe, a steel subframe must be installed.
‹› Before installing a steel subframe, some preparation work must be performed on certain rear axle transmissions. Refer to => [ Preparation Work,
Installing a Steel Subframe, AWD ] See: Preparation Work, Installing a Steel Subframe, AWD.
2
Nut
‹› 50 Nm + 180° turn
‹› Always replace after removal.
3
Spacer Sleeve
‹› Between subframe front bonded rubber bushings and body.