Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Console Lamp: Service and Repair
Center Console Lamps and Switches
Storage Compartment Illumination (L120)
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409),
screwdriver) will be positioned, using commercially available adhesive tape.
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Carefully remove trim - 1 -.
-
Remove screws - arrows -.
-
First pull panel toward rear in - direction of arrow 1 -, then upward in - direction of arrow 2 - and remove panel.