Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Remove sill panel trim from catches in door sill in front door area.
-
Loosen sill panel trim from mounts in area of B-pillar.
-
Remove sill panel trim from catches in door sill in front part of rear door area.
-
Remove trim on sides from door seal moldings.
-
Remove trim inward out of mounts in body - arrow -.
Driver side only
-
On vehicles equipped with interior monitoring, switch off the ignition and disconnect the wiring harness from the interior monitoring deactivation
switch (E267) - 1 -.
Installation
-
To install, perform the steps used for removal in reverse order.
C-Pillar Trim, Sedan Without Sun Shade
Pillar Trim
C-Pillar Trim without Sun Shade
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
Removal