Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Power Mirror Control Module: Customer Interest
Instruments - Inaccurate Door Mirror Movement
97 10 04
February 23, 2010
2019911 Supersedes T.B. Group 97 Number 10-03 dated February 11, 2010 to
remove Jetta applicability.
Vehicle Information
Condition
Door Mirror Moves Inaccurately to Stop Position
After adjusting door mirror using the memory function, mirror does not return to its original position.
Note:
The condition as described is based only on the memory function. Mirror position can be restored by manually operating the mirror switch.
Technical Background
Inaccurate mirror positioning, because of mechanical and/or electronic control problems.
Production Solution
New Door Control Module/Software installed as of:
^
Passat 3C_7E121329, 3C_7P079052
Service
New door control module software to correct mirror not returning to its original position.
Remove front driver door trim panel, see Repair Manual Group 70 Body Interior Trim in ElsaWeb.
Replace front driver door control module -J386-, see Repair Manual Group 97 Wiring in ElsaWeb.
Tip:
Always perform Front Passenger Door Control Module coding.
Warranty
Required Parts and Tools
No Special Parts required.
Additional Information