Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Cut through the remaining upholstery clips and loosen the cover from the backrest. It is not necessary to remove the headrest guides for this.
-
Remove the upholstery from the backrest frame. It is not necessary to remove the headrest guides for this.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Use (V.A.G 1634) when affixing cover to upholstery.
Rear Seat Heating Elements
The backrest and seat cushion heating elements are sown into the cover.
If one of the heat elements is faulty, the corresponding cover should be replaced.
‹› Cover and upholstery, front seat cushion, removing and installing, refer to => [ Front Seat Cushion ]
‹› Front Backrest Cover and Upholstery, Except Trendline, Removing and Installing, refer to => [ Front Backrest Cover and Upholstery, Except
Trendline ]
‹› Front Backrest Cover and Upholstery, Trendline, Removing and Installing, refer to => [ Front Backrest Cover and Upholstery, Trendline ]