Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Installation
-
To install, perform the steps used for removal in reverse order.
‹› When securing the cover on the child seat adjusting unit, use the (V.A.G 1634).
‹› When securing the integrated child seat the seat pan or seat frame, use the (V.A.G 1753A).
Child Seat Adjusting Unit Push Button With Trim
Rear Seat Cover and Upholstery
Child Seat Adjusting Unit Push Button with Trim
Removal
-
Remove the bench seat:
‹› Sedan: => [ Seat Bench ] See: Service and Repair/Removal and Replacement/Rear Seats
‹› Wagon: => [ Seat Bench ] See: Service and Repair/Removal and Replacement/Rear Seats
-
Remove the cover and upholstery from the integrated child seat. Refer to => [ Seat Bench Cover and Upholstery with Integrated Child Seat ].
-
Slide the transfer element - 2 - forward - arrow - and disengage it from the press button - 1 -.
-
Remove the two securing pop rivets - 6 -.
-
Press the two retaining hooks - 4 - and - 5 - and loosen trim - 7 - with press button - 1 - from child seat adjusting unit - 3 -.