Passat Sedan 4Motion V6-3.6L (BLV) (2007)
Water Pump: Service and Repair
Coolant Pump
Special tools, testers and auxiliary items required
‹› Engine Support Bridge (10 - 222 A)
‹› Refractometer (T10007)
‹› Drip Tray for VAS 6100 (VAS 6208)
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Torque Wrench (40-200 Nm) (V.A.G 1332)
‹› Spring Type Clip Pliers (VAS 5024 A)
Removing
-
Remove the noise insulation.
-
Remove the pendulum support.
-
Drain the coolant. Refer to => [ Draining and Filling ] See: Service and Repair/Procedures/Draining and Filling.
-
Remove the ribbed belt. Refer to => [ Ribbed Belt ] See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Ribbed Belt.
-
Install the (10 - 222 A) with (10 - 222 A/1) as shown and support the engine in the installed position at the right lifting eye.
-
Remove the engine mount to engine mount bracket bolts - arrows -.